Compact Portable Hydraulic Power Unit

Automation Services Inc. announces a new line of
Compact Portable Power-units.  

These power-units are:

• Engineered to be Robust.
• Provide Superior Control.
• Produce Less Heat.
• Light weight.
• Have a Small Footprint.
• Efficient.

Compact Portable Features:

• 10 and 20HP models.
• Frame made from heavy 2”x 2” square tube.
• Top doubles as a work table which easily removes for servicing the power unit.
• The flattop reservoir is specifically designed with pockets for easy handling with a forklift or pallet jack.
• Mobile Base with Non-Marring Casters. (Removes for fork truck transport or shipping)
• Center located lifting eye.
• Hydraulic Flow and Direction are controlled by a pendant that is plugged into the control panel.
• Changing the motor speed will change the output flow of the hydraulic pump from a minimum to a maximum flow. 
• Minimal oil temperature rise developed from power-unit and controls.
• 10 micron filter
• UL/CUL listed NEMA 4 electrical controls.
• 440, 460, 480, VAC input power (50/60 HZ 3 Phase).
• 380, 400 VAC input power (50/60 HZ 3 Phase) 25% Reduced Horsepower
• Line reactor to suppress noise from welding or other poor line conditions.
• Automatic low oil shutoff switch
• Hi oil temp shutoff switch
• 50’ cable standard on pendant.

Options:

• Tank heaters for hydraulic oil.
• Control panel heaters.
• Custom colors.
• Pendant cable lengths up to 150 feet.
• Custom Hydraulic Hoses for your application.
• Hose and fittings to match system connectors.

10 HP specifications (approximate)

• H X W X L  40.5” X 20.5” X  28”   Without mobile base.
• H X W X L  46” X 20.5” X  28”   With mobile base.
• Weight 605 lbs. with oil and mobile base.
• Current draw 20 Amps
• Approximate Reservoir capacity 15 gallons AW 32 or 46
• Hydraulic pressure factory set at 1800 psi.
• Hydraulic Flow 3 to 9 GPM.

20 HP specifications (approximate)

• H X W X L  40.5” X 23.5” X  32”   Without mobile base.
• H X W X L  46” X 23.5” X  32”   With mobile base.
• Weight 850 lbs. with oil and mobile base.
• Current draw 30 Amps
• Oil capacity 30 gallons AW 32 or 46
• Hydraulic pressure factory set at 1800 psi.
• Hydraulic Flow 3 to 18 GPM.

For further information or to request a quote, please:

Email or call:  Art Stubfors   artstubfors@asi-e.com

Phone 651-345-5753  ext. 201